Advanced Components

In most other spas the jet pump has to tackle double duty, powering the jets at high speed and the filtration cycles at low speed. This dual-function design can overtax a pump and seriously limit its durability.

Our separate Silent Flo 5000® circulation pump takes on the role of continuous filtration, assuring you of clean, heated water, 24 hours a day.

The Wavemaster® jet pump was designed for a single purpose: to deliver the finest massage experience by producing the most powerful flow through all the jets. Each pump has just one job to do, providing better performance over time.In addition, our patented pump shroud vents heat from the equipment compartment. This creates a cooler working environment for the motors and electronic components, contributing to a longer life for your Hot Spring® spa.

The Silent Flo 5000® circulation pump efficiently, continuously,
and quietly keeps your spa water clean, hot and ready to use.And by returning the warm, filtered water through the heater return at the bottom of the spa, your water temperature stays a more uniform temperature.

THE NO-FAULT® HEATER—NO WORRIES

Typically, the heater is the most vulnerable component of a spa because high heat and water cause the elements to corrode and fail. Failures due to water chemistry are commonly excluded from other spa warranties.

But the No-Fault heater is unlike any other spa heater. Its heating elements and housing are made of titanium for unmatched corrosion resistence. The most common cause of spa heater failures has been engineered out, and your heater warranty is valid for five years—regardless of water chemistry.

PURE, CLEAN WATER, ONLY MOTHER NATURE
DOES A BETTER JOB

Our multiple pump system provides continuously circulated
water for constant filtration, even when the spa is not in use.
So the water is always hot, always clean.

Water — it's the essential ingredient in
a spa. So you'll find that the water in a Hot Spring® spa is always crystal clear, fresh and pristine. To ensure it, we've created a comprehensive filtration system combining three key design elements: continuous filtration, 100% no-bypass filtration, and balanced filtration.

Continuous Filtration: In a Hot Spring spa, all the water is continuously being filtered. In fact, the spa's entire contents are completely filtered 10 to 15 times each day! It works like this: the Silent Flo 5000 pump - a dedicated, energy efficient, low-amp and, of course, quiet, pump—constantly draws water from the spa, runs it through the filter and the heater (heating only when necessary), then back to the spa. And it costs less to operate than a 75 watt light bulb.

Because the Silent Flo 5000 pump is totally automatic, there's no need to program long cleaning and heating cycles like you do with other spas. Nor do you have the wear and tear, energy drain or noise of a large jet pump running during those cycles. Quietly, your Hot Spring spa is always hot, clean and ready to enjoy.

100% No-Bypass Filtration
100% No-Bypass Filtration means that all the water passes through the filter before it re-enters the spa. With other spas, water can bypass the filter when the jets are on - the very time when you're in the spa and need clean water the most.

Bypassing occurs when there's too much pump and not enough filter—forcing unfiltered water, complete with body oils and debris, directly back into the spa.
Only Hot Spring spas filter all the water all the time.

Balanced Filtration
To ensure our filter cartridges are not overburdened so there's no need to bypass them, their square footage is matched with the gallon-per-minute flow of our pumps. Completing the system, a floating skimmer directs surface debris into the filter compartment and prevents it from floating back into the spa.

The filters are top loading for easy access; simply lift the filter lid to remove the cartridges for cleaning or replacement. Just like rotating the tires on your car, frequent rotation of the cartridges ensures their extra long life. And thanks to our multiple filter design system, there's no need for sidewall suction fittings—providing an extra measure of safety.